Plug-and-Play-Banner-2

Advantage Plug and Play Filter Systems

The Advantage Plug and Play Filter was truly designed with you the consumer in mind. It provides everything you want in a quality koi pond filtration system. Each of the 5 different size systems comes standard with the Advantage Electrical Control Tower. The Electrical Control Tower makes each of these systems extremely easy to install (see video on right for an example), operate and maintain. In designing these systems we carefully chose the best quality equipment available. Additionally, we slightly over sized each piece of equipment so that we could ensure you never outgrow the system. However, the in each system has been carefully selected to provide you with sufficient water flow to meet your needs, yet do this as economically as possible. Plus, all Advantage products come with a “1 year, unconditional, no questions asked satisfaction Guarantee.” This means you can’t lose buying an Advantage Plug and Play Filter System. If you have any questions regarding our satisfaction guarantee, see the following page or give us a call at 916-652-4231.

Satisfaction Guarantee (Link)

Page-Break

Pricing and Details:

Page-Break

Page-Break

Three reasons why the Advantage Plug and Play is right for you.

1) It’s the easiest system to install.

The Advantage Plug and Play system is by far the easiest koi pond filtration system to install. Simply follow these 6 steps. (1) Place the reinforced vinyl equipment pad on a flat surface. (2) Place the equipment on the pad in the areas marked out for each piece of equipment. (3) Attach the pre-plumbed pipes to the equipment by screwing the unions together. (4) Plug the equipment into the appropriate plug sockets on the base of the Plug and Play Electrical Tower. (5) The only gluing necessary is to connect the filter to your ponds intake and return line. (6) Finally, plug the main cord into a 20 amp supply outlet. With the Advantage Plug and Play System, you get a perfect install every time. The whole process takes less than 1 hour.

Installation – Plug and Play System

2) It’s the easiest system to operate.

Typical operation requires back washing the filter once a week during summer months and once every two weeks during winter months. The back washing procedure takes less than 5 minutes and there is no need to get your hands wet. Back washing is a simple process of moving the multiport valve and turning on and off the and blower which are controlled with the built in control switches.

Plug and Play Backwash Instructions, and Installation Instructions.

3) It’s the easiest system to maintain.

If it ever becomes necessary to repair or replace any of the equipment on the system, the process could not be easier. The pump, ultraviolet light and blower all are connected to the system by 2 inch unions. To replace an item you simply open up the weatherproof box, unplug the item and then disconnect the plumbing unions. To replace the item you just reverse this process.

Page-Break