The Advantage Pond Heater

The Advantage Koi Pond Heater is by far the most efficient heater available for koi ponds today. This heater uses the state of the art technology when it comes to heating water. It will use only the precise amount of heat required to obtain and hold the temperature you select. It does this by automatically modulating the heat from 100% down to as little as 20% of capacity once the set temperature is reached. This drastically increases the heating efficiency of the heater. This also makes it possible for it to maintain the pond temperature to within one degree of the set temperature.

In addition, the unique patented stainless steel heating chamber allows the pond water to flow directly through the heater without the need for a separate external pump or heat exchanger.

  • An amazing 95% efficiency rating makes it the most efficient heater for koi ponds on the market today.
  • Operates on either gas or propane.
  • Weather proof cabinet standard.
  • 25” W x 24” D x 48” H
  • 6 sizes available from 55,000 to 285,000 BTU.
  • Will maintain pond water temperature within 1 degree of set point.
  • Fully modulating heater with 5 different firing levels based on demand.
  • All Stainless Steel heating chamber.
  • No copper components exposed to water.
  • No complicated heat exchanger needed.
  • The culmination of 4 years of development.

 

Water-Backed Combustion Chamber

An outstanding feature of the fire tube design is a water backed combustion chamber. By having the combustion chamber surrounded by water, the Advantage Koi Pond Heater has more heating surface area. This larger heating surface area allows for efficiencies up to 99%.

 

Fully Modulating Burner

The SMART SYSTEM allows fully modulating combustion with 5:1 turndown. The burner can fire as low as 20% of maximum output and modulates the firing rate up to 100% as demand increases. The burner is a single stainless steel assembly covered with woven steel mesh and fires in a 360° pattern along the entire length of the burner. This allows the compact Advantage Koi Pond Heater to exceed the modulation capacities of units entire length of the burner. This allows this compact design to exceed the modulation capacities of units with larger multiple burners.

 

Advanced Negative Regulation Technology

The Advantage Koi Pond Heater safely and reliably operates with supply gas pressure as low as 4 inches of water column. Negative Regulation (Neg/Reg) technology automatically adjusts fan speed to ensure the correct volume and mix of fuel and air throughout the firing range.

 

Fire Tube Design

This fully welded ASME Certified stainless steel heat exchanger uses oval shaped tubes to pass heat from the products of combustion into the water stored in the vessel. To facilitate heat transfer the tubes are manufactured with dimples to slow the flue products and extract available latent energy. With a fire tube design the flue products are inside tapered passage ways and the water is passed through the vessel. Since the flue products pass through tubes and the water is circulated through a larger diameter vessel a fire tube design allows for minimal head pressure loss through the boiler which allows the boiler to be installed easily into various hydronic applications.